ICRA 2011 Paper Abstract

Close

Paper WeP209.5

Duan, X. C. (Xidian University), Qiu, Yuanying (School of Electromechanical Engineering, Xidian University), Du, J. L. (Xidian University), Zhao, Ze (Xidian University), Duan, Q.J (Xidian University)

Real-Time Motion Planning for the Macro-Micro Parallel Manipulator System

Scheduled for presentation during the Regular Sessions "Motion and Path Planning IV" (WeP209), Wednesday, May 11, 2011, 16:25−16:40, Room 5D

2011 IEEE International Conference on Robotics and Automation, May 9-13, 2011, Shanghai International Conference Center, Shanghai, China

This information is tentative and subject to change. Compiled on December 10, 2019

Keywords Motion and Path Planning, Motion Control of Manipulators, Industrial Robots

Abstract

In order to achieve the high motion precision of the macro-micro parallel manipulator system for a large radio telescope, its real-time motion planning is dealt with in this paper. To uniquely determine the spatial position and orientation of the cable driven parallel manipulator, the real-time optimization is conducted according to the principle of uniform tension in the six driving cables. Synchronized points and the “judge and wait” mechanism ensure the continuity and synchrony of the trajectory tracking of the two parallel manipulators. The preadjustment of the micro parallel manipulator reduces the drastic dynamical coupling as a result of the fast movement of the micro manipulator. Besides, over-workspace avoidance procedure is introduced to restrict the micro parallel manipulator not to exceed it workspace. Experimental results validate the high precision of the macro-micro parallel manipulator system with supervisory controller and the motion prediction algorithm.

 

 

Technical Content © IEEE Robotics & Automation Society

This site is protected by copyright and trademark laws under US and International law.
All rights reserved. © 2002-2019 PaperCept, Inc.
Page generated 2019-12-10  05:24:27 PST  Terms of use